The wishlist name can't be left blank

20" Weldline Gas/Oil Liner (Class 2)

In stock
SKU
20WL
20" Weldline Gas/Oil Liner (Class 2) is available to buy in increments of 1
  • Stainless Steel Construction
  • Superior Quality
  • Seam Welded
  • Uk Manufactured
  • 10 Years Guarantee

Weldline gas flue liner

20" Weldline Gas & Oil Flue Liner

Seam Welded Construction

Weldline is made with an overlap of metal which is continously welded. This creates the ultimate seal. Completely gas and water tight, yet still incredibly flexible.

Superior Quality

Weldline is built with high quality 316 grade stainless steel, which is constantly monitored for tolerance, concistency and conformance to specification.

Super Strong

When weldline is created, the joints in this high quality material are welded and a bond is formed that is actually stronger than the metal itself.

 

Specifications
Flue Liner:

Please Select Meters Required

Designation: T600 P2 W Vml50010 G
Construction 0.1mm grade 316L stainless steel
Warranty 10 Years
Fuel Type Gas & Oil
Suitable For Condensing Yes
Component Type Flue Liner
Building Regulations Document J
Installation Guide: You can install your gas liner either from the top or bottom of the brick chimney stack. Whichever way you chose to install the gas liner, please ensure that you have sufficient clearance around the outside of the liner to ensure the least amount of friction, or possibility of catching any bricks within the chimney stack, does not occur.

Unpack your liner and, attaching a drawstring to a nose cone, (making sure it is long enough to reach the bottom of the stack), connect the nose cone (purchase separately) to the end of the liner using gaffer tape.

You will need two people to install your liner successfully, one at either end of the chimney stack. From the top of the roof, start to push the liner, nose cone first, down the stack. The person at the bottom of the stack should hold the string and take up the slack. Work in tandem to feed the liner down the chimney stack, ensuring you leave enough liner at the bottom to secure your adaptor and enough at the top to secure the top fixings.
Copyright © 2021- Turner & Wilson, Inc. All rights reserved.