7" Gas/Oil Split Clamp & Plate
In stock
SKU
7CPA
- Aluminium Construction
- Seal of Top Of Stack
- Suitable to use with gas and 28 sec oil applications.
7" Split Clamp and Plate
To secure liner and terminate the top of the chimney stack.
- Aluminium Construction
- Suitable to use with gas and 28 sec oil applications.
This item is not suitable for use on solid fuel liners.
| Construction | Aluminium |
|---|---|
| Fuel Type | Gas & Oil |
| Suitable For Condensing | No |
| Component Type | Top Support |
| Building Regulations | Document J |
| Installation Guide: | Once you have cut the liner at the top of the chimney stack, slide the two plates around the chimney liner at the point of termination and secure with bolts provided. The plate should lay on the top of the chimney stack. If you are fitting a terminal, remember to leave about 100mm of liner above the plate to secure it. |