7" Damper Unit - Stove Pipe
In stock
SKU
VPDAMPER07
- Robust
- Adjust The Draft In Your System
- Friction Fit
- High Quality
- Extremely High Resistance to heat
7" Draft Damper Unit - Stove Pipe
Vitreous Stove Pipe is used to connect to stove or appliance then Flexible flue liner or Titan Insulated Flue System.
Used to Regulator the Draft in your Installation.
- Robust
- Friction Fit
- High Quality
- Extremely High Resistance to heat
Designation: | EN 1856-2 T600 N1 D Vm L80060 G375 NM |
---|---|
Construction | 1mm Low Carbon Steel - vitreous enamel coating |
Fuel Type | Oil, gas and Solid Fuels, for domestic heating appliances |
Suitable For Condensing | No |
Component Type | Length |
Building Regulations | Document J |
Installation Guide: | Vitreous stove pipe should always be installed 3 x the internal diameter away from any combustible materials. Stove pipe should only be used as a connection piece and never used externally on any property. Our stove pipe has a compression fit but we would always advise to use a thin layer of fire cement on each joint. |