8" Twinflex Pot Hanger
In stock
SKU
8PH
- Steel Construction
- Easy to Install
- Complete System
- Fits to top of Chimney Stack
- UK Manufactured
- Genuine Twinflex Component
8" Twinflex Pot Hanger
Suspends the flue liner at the top of the chimney stack. removes the need for a top plate and clamp.
- Steel Construction
- Easy to Install
- Complete System
- Fits to top of Chimney Stack
- UK Manufactured
- Genuine Twinflex Component
| Construction | 0.7mm 316 Stainless steel |
|---|---|
| Fuel Type | Dry Logs, Peat, Oil, Gas, Open Coal Fires & Smokeless fuels |
| Suitable For Condensing | No |
| Component Type | Cowls/Terminals |
| Building Regulations | Document J |
| Installation Guide: | Used as a complete system to secure the liner at the top of the chimney / flue stack. This is commonly used where a clay pot is in place (as there is no need to remove the pot to install). Simply slide the spigot of the pot hanger into the end of the flue liner and secure by tightening the smaller jubilee clip. Then, place the cowl on the end of the pot and secure using the larger jubilee clip in the same way to the chimney pot itself. Fits chimney pots up to 305mm external diameter. |