Chrome Floor Ventilation Louvre
In stock
SKU
VENT01
- Room ventilator utilising air from a ventilated sub-floor void.
- Mirror polished solid chrome louvre grille provides a stylish appearance.
- Inverted louvres give a flush finish.
- Chrome coloured screws included.
- 11,000mm² (110cm²) per set.
Floor Ventilator with Chrome Louvre
- Room ventilator utilising air from a ventilated sub-floor void.
- Mirror polished solid chrome louvre grille provides a stylish appearance.
- Inverted louvres give a flush finish.
- Chrome coloured screws included.
- 11,000mm² (110cm²) per set.
| Dimensions | 267mm L x 95mm H x 125mm D
|
|---|---|
| Construction | Louvre grille: 1mm thick Polished Steel <br />Sleeve: Polypropylene (contains recycled plastic) |
| Suitable For Condensing | No |
| Component Type | Accessories |
| Building Regulations | Document J |
| Installation Guide: | Cut an opening in the floor and insert the sleeve (sleeve can be trimmed with a fine tooth saw to reduce the depth if required). Fasten the louvre to the sleeve through the pre-formed holes using the screws provided. Peel off the protective film. Note: When installing in an uncarpeted floor the flange may be trimmed and the louvre ventilator screwed to the floor to maintain as flush a finish as possible. Important: In areas where radon gas has been identified as a problem, ventilation shall not be taken from the space below ground floor level (e.g. using a floor vent), or interfere in any way with any remedial measures already in place to prevent radon gas entering the habitable part of the dwelling. |
