4" Flexible Liner To IL Connector
In stock
SKU
ILFTIL04
- Twin Lined System
- Air Gap insulated
- Aluminium Lined
- Zalutite Outer Casing
- Strong rigid System
4" Flexible Liner To IL Connector
Designed to be secured into the top of a stainless steel flexible flue liner at the point where the liner exits an existing masonry, or similar chimney. Connection would normally be in the roof space, and the IL Gas Vent continues to termination in the normal manner.
- Twin Lined System
- Air Gap insulated
- Aluminium Lined
- Zalutite Outer Casing
- Strong rigid System
Designation: | BS EN 1856-1: T250 N1 D VmL11030 0(50) |
---|---|
Construction | Aluminium liner protected by an outer casing of Zalutite |
Fuel Type | IL gas vent is suitable for gas appliances, typically in domestic or small commercial installations |
Suitable For Condensing | No |
Component Type | Adaptor |
Building Regulations | Document J |
Installation Guide: | This is a fitting for connecting an IL Gas Vent to a flue liner. The adaptor makes a normal joint to the top (male) of the gas vent length. The flue liner then sits in the 60mm deep socket and is secured with self tapping screws (not provided). Seal the joint with fire cement. |