4" IL Gas Vent Terminal
In stock
SKU
ILGVT04
- Twin Lined System
- Air Gap insulated
- Aluminium Lined
- Zalutite Outer Casing
- Strong rigid System
4" IL Gas Vent Terminal
An aluminium terminal/cap, with a perforated sheet metal bird screen, which allows rapid exhaust of combustion products.
- Twin Lined System
- Air Gap insulated
- Aluminium Lined
- Zalutite Outer Casing
- Strong rigid System
Designation: | BS EN 1856-1: T250 N1 D VmL11030 0(50) |
---|---|
Construction | Aluminium liner protected by an outer casing of Zalutite |
Warranty | 5 years |
Fuel Type | IL gas vent is suitable for gas appliances, typically in domestic or small commercial installations |
Suitable For Condensing | No |
Component Type | Cowls/Terminals |
Building Regulations | Document J |
Installation Guide: | Terminals should be sited to allow the products of combustion to disperse freely at all times. To avoid adverse wind or pressure effects which might impede vent flow, the termination must be correctly located in relation to the roof and any nearby structures No part of the flue outlet shall be less than 1.5 metre measured horizontally to the roof surface, or any wall. Where the flue terminates above the ridge, it shall do so by not less than 600mm, other than where the flue terminates with a purpose designed ridge terminal. |