The wishlist name can't be left blank

6" IL Gas Vent Terminal

In stock
SKU
ILGVT06
  • Twin Lined System
  • Air Gap insulated
  • Aluminium Lined 
  • Zalutite Outer Casing
  • Strong rigid System

6" IL Gas Vent Terminal

An aluminium terminal/cap, with a perforated sheet metal bird screen, which allows rapid exhaust of combustion products.

  • Twin Lined System
  • Air Gap insulated
  • Aluminium Lined 
  • Zalutite Outer Casing
  • Strong rigid System
Specifications
Designation: BS EN 1856-1: T250 N1 D VmL11030 0(50)
Construction Aluminium liner protected by an outer casing of Zalutite
Warranty 5 years
Fuel Type IL gas vent is suitable for gas appliances, typically in domestic or small commercial installations
Suitable For Condensing No
Component Type Cowls/Terminals
Building Regulations Document J
Installation Guide: Terminals should be sited to allow the products of combustion to disperse freely at all times.

To avoid adverse wind or pressure effects which might impede vent flow, the termination must be correctly located in relation to the roof and any nearby structures

No part of the flue outlet shall be less than 1.5 metre measured horizontally to the roof surface, or any wall. Where the flue terminates above the ridge, it shall do so by not less than 600mm, other than where the flue terminates with a purpose designed ridge terminal.
Copyright © 2021- Turner & Wilson, Inc. All rights reserved.