TITAN DW is a multi fuel, twin wall insulated flue system, available in Matt Black or Stainless Steel, Titan is suitable for all applications in negative and positive pressure, including condensing (joint seals).

Designed for use with all gas, oil, pellet, wood, coal domestic, commercial or industrial appliances, it has a maximum constant working temperature 600° C and short firing up to 700° C with thermal shock testing up to 1000° C. 

Benefits of a Twin Wall Insulated Flue System

Twin wall insulated flues are the perfect choice for both new-build projects and renovations. They provide a simple, low-cost and effective solution for removing smoke and gases from building interiors.

If you are installing a new heating appliance, such as a woodstove / log burner, gas coal-effect fire or an oil boiler, you will probably need a twin wall flue system, especially if you do not already have a brick chimney stack.

Twin wall can be constructed to produce a safe chimney system for your appliance, with a simple push-fit joint system helping to make your installations quick and easy. As these products are prefabricated in a variety of shapes and sizes, you can mix and match components to get a system that fits your requirements.

Suitable for the creation of both indoor and outdoor flues, they can be used to pass through roofs and floors of buildings. This makes them suitable for use in boats, yurts, log cabins, van conversions and even garden offices. 

Main features:

• Simple open ended push-fit jointing system, secured by a locking band.
• 70 mm wide recessed locking band, aesthetically pleasing look.
• 60 mm plugged in joint + wider locking band = better holding in horizontal runs.
• Homogenous 25 mm high quality rigid rock wool . insulation with 120 kg/cubic meter guaranteed density.
• Continuous insulation: No thermal bridge between inner and outer steel case.
• Low outer case temperature.
• Operating temperature of 600° C – Soot fire tested at 1000° C.
• Free expansion of the inner flue liner, assuring the integrity of the flue after a soot fire.
• Jointing system with capillary break prevents moisture being drawn through the joint.
• Positive pressure till 200 pa with the use of joint seals in the socket of the inner liner specially designed for modern condensing appliances.
• 3 meters freestanding above last support.
• Lateral support every 4 metres.
• Load bearing support every 16 metres.
• Available in Matt Black or Stainless Steel.

It's really easy to order on our website, but if you need any technical help and advice, call us 01606 861 191.